This website uses cookies

SHARKCAGE.com uses cookies to personalize ads and content and to learn more about our visitors. We also share information with social media, advertising, and analytics partners who may use the information from our site in conjunction with information gathered elsewhere. By closing this message and continuing to use our website you consent to our cookies.

MODULAR WAREHOUSE

CONTINUOUS REORGANIZATION

Just by moving the cages, your warehouse layout can change from focusing only on storage capacity to having a large area available for packing, maintenance or distribution. If needs temporarily exceed what is possible within the four walls of the warehouse, move storage outside and even protect material from the elements by adding a cover to the cage.
Warehouse reorganization within 8h to Maximum fill option with more capacity or warehouse with distribution area.

MAXIMUM FILL

For additional storage capacity,
use the aisle space for storage temporarily

DISTRIBUTION AREA

For more space for distribution, packing or maintenance,
move some storage outside, in containers or flat pack some of the racks
20ft container outfitted with SHARKCAGEs — mobile cages with shelves.
MOVE INTO CONTAINERS
Move some of the cages into containers temporarily or permanently for additional storage space. The container can even be transported with cages loaded to the maximum weight capacity.
SHARKACGE Stack-rack outside of a warehouse with raincover.
STORE OUTSIDE
The SHARKCAGE will not rust and content can be protected from the elements by adding a cover. Use a lockable cage outside if there is a need for security.
Flat-packed stack racks shelving system in a warehouse
FLAT PACK WHEN NOT IN USE
Keep an extra stack of flat packed STACK RACKs to accodate more storage temporarily or flat pack some aisles when you need the space for something else.

RAPID SETUP

Start setting up and operate your warehouse immediately. Don't waste time with extensive planning or installation. The warehouse can be operated within hours of receiving the cages.
Two people assemble stack-racks while forklift drives assembled unit for stacking
1. ASSEMBLE WITHOUT TOOLS
No tools are required to assemble a STACK RACK XXL. Just drop in the end walls and attach a gridded back wall (optional).
2. POSITION AND STACK
Position the cages where you want them and stack to the desired height. No fixtures are required, but an earthquake mitigation kit can be purchased separately.
3. OPERATE
Start loading the cages with pallets or boxes and start to operate.
We have been able to support soldiers within 24 hours from starting to set up our warehouse.
Logistics officer

MOVE OR RELOCATE

SHARKCAGEs are designed to be moved frequently as opposed to normal pallet racks or cabinets. Therefore, you can bring your warehouse with you to operate remotely or to relocate the warehouse
START BUILDING UP AND OPERATE
Start building up the new warehouse and operate before the original warehouse is even broken down
FLAT PACK AND LOAD UP
Move the entire warehouse system with minimal risk of damaging it.
OPERATE DURING MOVING
The SHARKCAGEs all fit well in containers so you can operate out of containers during the move.
80 STACK RACKs
fit in each 40ft HC container
We have already moved warehouse locations three times since we got the first cages two years ago
Logistics officer
Flat-packed STACK-RACKS on a flat-bed truck being unloaded to a warehouse

PLAN WITH A FEW CLICKS

Our 3D PLANNER is free to use and makes it easy to draw up your warehouse or a temporary location and add cages. Use it to see how your warehouse will work and plan how you will change it. Go to 3Dplanner.sharkcage.com to test it out!

Screenshot of a warehouse made in 3D planner and filled with SHARKCAGEs
PLAN CHANGES OR YOUR MOVE
Plan your future layout in advance using a library of real-size containers, vehicles, people and SHARKCAGE products. Work directly in your browser without downloading any software and see the layout in top view, 3D view or even take a virtual walk-through.
Schematic 2D view of warehouse with Receiving, storage and distribution area
TEST YOUR LAYOUT
Preview your plan in 3D, measure distances and "walk" around to ensure the new warehouse fits your need. You can easily create and save several pre-planned layouts for different operations. Always Ready to move!
Screenshot of forklift moving stack-rack inside a warehouse built in SHARKCAGE3D planner
PRINT THE LAYOUT
Print saved plans after adding text and measurements. NSN, product codes and product sheets for SHARKCAGE products are also available.
Stack of PDFs with layout and product info printed from SHARKCAGE3D planner

MODULAR AND STACKABLE

All our cages are modular and stackable, but some cages are better suited for pallets, some for bulk storage and some for smaller parts. The TACTICAL BASKET and TACTICAL LOCKER can even be locked, sling loaded and transported fully loaded fitting perfectly in containers and on air pallets.
SHARKCAGE cages positioned from left to right: stack-rack, tactical basket, tactical locker, wheel cage.
STACK-RACK XXL+
NSN: 8145-01-512-1017
Modular pallet rack that can be assembled without tools.
Tactical Basket XL
NSN: 8145-01-499-0718
Lockable modular and secure bulk storage with plated bottom and hinged fron gate that can be walked on.
TACTICAL LOCKER MEDIUM
NSN: 8145-01-512-0901
Modular and secure small part storage.
WST II
NSN: 8145-01-512-0913
Modular vertical wheel storage with flexible height whick accommodates most military wheels.

T-RAX // STACK RACK XXL+

The STACK RACK XXL+ accommodates pallets and boxes that are too large to carry by hand. They are built up or flat packed in minutes. Ideal in an area where permanent pallet racks can not be installed or where there is a need to change layout often. Red and blue color is optional.
Stack Rack XXL+ 3D render
modular
modular
modular
20 FT
modular
FLAT RACK
TX-SR-XX-ST-02
115’’ / 44’’ / 60’’ ( W / D / H)
Weight 345lbs
Capacity 5000lbs
Stackability 15ft
1 compartments -1 levels

Tactical Basket XL

Gas spring assisted top lid and detachable front gate that are secured with one standard padlock. The gate can be used to roll tents, covers and other bulky material into the cage, or to simplify walking into the cage when stacking equipment like parachutes.
Tactical Basket XL
SHARKCAGE Tactical Basket XL being loaded on a flatbed by a forklift.
modular
modular
20 FT
modular
FLAT RACK
modular
TRICON
modular
463L-AIR
modular
No of lockable compartments
SC-BA-XL-GT-01
NSN: 8145-01-499-0718
84’’ / 52’’ / 43’’ ( W / D / H)
Weight 660lbs
Capacity 4000lbs
Stackability 15ft
1 compartment - 1 level

TACTICAL LOCKER MEDIUM

With deep wide shelves and an optional box rack solutions, the cage is perfect for storing anything from small to large items.
modular
modular
modular
modular
20 FT
modular
FLAT RACK
modular
TRICON
modular
463L-AIR
modular
No of lockable compartments
SC-TL-MD-2D-03
NSN: 8145-01-512-0901
70’’ / 41’’ / 79’’ ( W / D / H)
Weight 890lbs
Capacity 5000lbs
Stackability 15ft
3 compartments - 3 levels
Multiple shelf positions

TACTICAL LOCKER CWL

Transform a standard 20ft container into a mobile warehouse, with the unique blocking and bracing system. Add a box rack (optional) to store small items.
modular
modular
modular
modular
20 FT
modular
No of lockable compartments
SC-TL-WL-2D-03
NSN: 8145-01-499-0723
57’’ / 30’’ / 85’ ( W / D / H)
Weight 475lbs
Capacity 4000lbs
Add blocking and bracing, one per cage with NSN: 8145-01- 499-0720
Stackability 15ft
3 levels, multiple shelf positions

BOX-RACK with workbench

Our BOX-RACKS works as drawers, but you can easily pull the box out and bring it with you. The box racks are without moving parts, which makes them extremely durable in wet or dusty environments. Boxes come with smaller internal divider boxes. Available also for the TACTICAL LOCKER CWL, but without the Work Bench.
modular
modular
modular

For:
TACTICAL LOCKER MEDIUM

PC: BR-WB-04-03-81
Includes 9 ea POB-6 boxes and 3 ea SLIDE-6.

For:
TACTICAL LOCKER CWL

PC: PR-RC-03-03-81
Includes 9 ea POB-6 boxes.
Without Workbench.

WST II

Storage and transportation of two large wheels from 35" go 54" in diameter, 18.5" wide and 2000 lbs each. Designed to accommodate MRAP wheels, but also fits other wheels.
Mobile Wheel cage WST II. 3D render.
Stackable wheel cage WST II with warehouse workers around.
WST II with two wheels inside.
modular
20 FT
modular
FLAT RACK
modular
TRICON
modular
463L-AIR
SC-WS-HD-TP-01
NSN: 8145-01-512-0913
44’’ / 55’’ / 67’’ ( W / D / H)
Weight 385lbs
Capacity 5000lbs
Stackability 15ft
CONTACT ONE OF OUR OFFICES

United States

172 Creekside Park
Suite 105
Spring Branch, TX 78070
1-888-350-CAGE

Europe

26 Noreveien
0379 Oslo, Norway
+47 66 69 66 70
Most of our products are patented or in patent-pending status.
Copyright © 2018 SHARKCAGE Inc